outgoing:

Communication with search engines.

outgoing:
  request_timeout: 2.0       # default timeout in seconds, can be override by engine
  max_request_timeout: 10.0  # the maximum timeout in seconds
  useragent_suffix: ""       # information like an email address to the administrator
  pool_connections: 100      # Maximum number of allowable connections, or null
                             # for no limits. The default is 100.
  pool_maxsize: 10           # Number of allowable keep-alive connections, or null
                             # to always allow. The default is 10.
  enable_http2: true         # See https://www.python-httpx.org/http2/
  # uncomment below section if you want to use a custom server certificate
  # see https://www.python-httpx.org/advanced/#changing-the-verification-defaults
  # and https://www.python-httpx.org/compatibility/#ssl-configuration
  #  verify: ~/.mitmproxy/mitmproxy-ca-cert.cer
  #
  # uncomment below section if you want to use a proxyq see: SOCKS proxies
  #   https://2.python-requests.org/en/latest/user/advanced/#proxies
  # are also supported: see
  #   https://2.python-requests.org/en/latest/user/advanced/#socks
  #
  #  proxies:
  #    all://:
  #      - http://proxy1:8080
  #      - http://proxy2:8080
  #
  #  using_tor_proxy: true
  #
  # Extra seconds to add in order to account for the time taken by the proxy
  #
  #  extra_proxy_timeout: 10.0
  #
request_timeout :

Global timeout of the requests made to others engines in seconds. A bigger timeout will allow to wait for answers from slow engines, but in consequence will slow SearXNG reactivity (the result page may take the time specified in the timeout to load). Can be override by timeout in the engine:.

useragent_suffix :

Suffix to the user-agent SearXNG uses to send requests to others engines. If an engine wish to block you, a contact info here may be useful to avoid that.

pool_maxsize:

Number of allowable keep-alive connections, or null to always allow. The default is 10. See max_keepalive_connections Pool limit configuration.

pool_connections :

Maximum number of allowable connections, or null # for no limits. The default is 100. See max_connections Pool limit configuration.

keepalive_expiry :

Number of seconds to keep a connection in the pool. By default 5.0 seconds. See keepalive_expiry Pool limit configuration.

proxies :

Define one or more proxies you wish to use, see httpx proxies. If there are more than one proxy for one protocol (http, https), requests to the engines are distributed in a round-robin fashion.

source_ips :

If you use multiple network interfaces, define from which IP the requests must be made. Example:

  • 0.0.0.0 any local IPv4 address.

  • :: any local IPv6 address.

  • 192.168.0.1

  • [ 192.168.0.1, 192.168.0.2 ] these two specific IP addresses

  • fe80::60a2:1691:e5a2:ee1f

  • fe80::60a2:1691:e5a2:ee1f/126 all IP addresses in this network.

  • [ 192.168.0.1, fe80::/126 ]

retries :

Number of retry in case of an HTTP error. On each retry, SearXNG uses an different proxy and source ip.

enable_http2 :

Enable by default. Set to false to disable HTTP/2.

verify:$SSL_CERT_FILE, $SSL_CERT_DIR

Allow to specify a path to certificate. see httpx verification defaults.

In addition to verify, SearXNG supports the $SSL_CERT_FILE (for a file) and $SSL_CERT_DIR (for a directory) OpenSSL variables. see httpx ssl configuration.

max_redirects :

30 by default. Maximum redirect before it is an error.

using_tor_proxy :

Using tor proxy (true) or not (false) for all engines. The default is false and can be overwritten in the engine: